BOAT HOUSE DOOZIE SIDE MOUNT 9’ OR 10’

By adding upper beams to your boat house, you are allowing installation flexibility providing leeway in where the lifting points are located.

The Overhead Side Mount Boat Lift differs from the Overhead Center Mount because it has the Motor, Gear Plate, and Pipe mounted on one of the sides of your lift, instead of the center. Having it mounted on the side allows for much more room above your boat, making this lift ideal for a wakeboard boat or a boat with a t-top.

• Capacities

  • 4,000lb

  • 6,000lb

  • 8,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete (except wood)

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

  • Carpet for bunks (the wood)

• Side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The Boat House Overhead Side Mount Boat Lifts are available with 8', 9', or 10' cradles. Cradles are the bottom beam.

• Enclosed gear, aluminum bunks, and aluminum cradles are available for upgrade

DOOZIE DELUXE STRAP 12’ OR 14’

This lift can be used in most boat house designs with properly placed pilings. These are most commonly used in very shallow water.

• Capacities

  • 3,000lb

  • 4,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

• Side mounted drive for easy maintenance

• Lift range 10' - lift speed approximately 3.5 ft/min

• Single Side Mounted Motor

• 12' or 14' Weighted Straps and Cable Weights

• Enclosed gear available for upgrade

DOOZIE side MOUNT STRAP 12’ OR 14’

Our Overhead Side Mount Boat Lifts are ideal for any tight situation in your boat slip.

By adding upper beams to your boat house, you create flexibility in where the lifting points are located.

• Capacities

  • 4,000lb

  • 6,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

• Side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The Boat House Overhead Side Mount Boat Lifts are available with: 12' or 14' Weighted Straps and Cable Weights

• Enclosed gear available for upgrade

DOOZIE CENTER MOUNT STRAP 12’ OR 14’

Our Overhead Center Mount Boat Lifts are ideal for any tight situation in your boat slip.

By adding upper beams to your boat house, you create flexibility in where the lifting points are located.

• Capacities

  • 4,000lb

  • 6,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

• Center mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The Boat House Overhead Center Mount Boat Lifts are available with: 12' or 14' Weighted Straps and Cable Weights

• Enclosed gear available for upgrade

DOOZIE 2 MOTOR 9’ OR 10’

Our Overhead Center Mount Boat Lifts are ideal for any tight situation in your boat slip.

By adding upper beams to your boat house, you create flexibility in where the lifting points are located.

The 2 motor boat lift differs from the single motor because it has the Motor, Gear Plate, and Pipe mounted on both sides of your lift. Having two motors allows for more room weight capacity

• Capacities

  • 6,000lb

  • 8,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete (except wood)

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

  • Carpet for bunks (the wood)

• Double side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The Boat House Overhead Center Mount Boat Lifts are available with 9' or 10' cradles. Cradles are the bottom beam

• Enclosed gear, aluminum bunks, and aluminum cradles are available for upgrade

DOOZIE 2 MOTOR STRAP 12’ OR 14’

By adding upper beams to your boat house, you are allowing installation flexibility providing leeway in where the lifting points are located.

The 2 motor boat lift differs from the single motor because it has the Motor, Gear Plate, and Pipe mounted on both sides of your lift. Having two motors allows for more room weight capacity.

• Capacities

  • 6,000lb

  • 8,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

• Double side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• 12' or 14' Weighted Straps and Cable Weights

• Enclosed gear available for upgrade

DOOZIE DELUXE 2 Motor STRAP 12’ OR 14’

This lift can be used in most boat house designs with properly placed pilings. These are most commonly used in very shallow water.

• Capacities

  • 6,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

• Side mounted drive for easy maintenance

• Lift range 10' - lift speed approximately 3.5 ft/min

• Single Side Mounted Motor

• 12' or 14' Weighted Straps and Cable Weights

• Enclosed gear available for upgrade

DOOZIE Deluxe 2 MOTOR 9’ OR 10’

This lift can be used in most boat house designs with properly placed pilings. It is one of our best sellers due to the price point, while it is still strong enough to pick up a very wide variety of boats.

The 2 motor boat lift differs from the single motor because it has the Motor, Gear Plate, and Pipe mounted on both sides of your lift. Having two motors allows for more room weight capacity

• Capacities

  • 6,000lb

  • 8,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete (except wood)

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

  • Carpet for bunks (the wood)

• Double side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The Boat House Overhead Center Mount Boat Lifts are available with 9' or 10' cradles. Cradles are the bottom beam

• Enclosed gear, aluminum bunks, and aluminum cradles are available for upgrade

4 POST PILING 10’, 11’, 12’, or 13’

This lift is ideal for decks or docks that don't have an overhead structure - all this lift needs is 4 properly placed pilings.

The Four Post Boat Lift is a great option for boats that have t-tops, tuna towers, wakeboard towers or any other tall extruding measure that would interfere with a standard lift.

• Capacities

  • 6,000lb

  • 8,000lb

  • 12,000lb

  • 14,000lb

• Hot Dip Galvanized

• Designed to lift boat from above, under roof

• Lifts come complete (except wood)

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

  • Carpet for bunks (the wood)

• Double side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The 4 post piling boat lifts are available with 10', 11', 12', or 13’ cradles. Cradles are the bottom beam

• Enclosed gear, aluminum bunks, and aluminum cradles are available for upgrade

ALUMINUM 4 POST PILING

The Four Post Boat Lift is a great option for boats that have t-tops, tuna towers, wakeboard towers or any other tall extruding measure that would interfere with a standard lift.

• Capacities

  • 7,000lb

  • 10,000lb

• Aluminum

• Designed to lift boat from above, under roof

• Lifts come complete

  • Pipe, steel, parts, cable, and hardware

  • Spring loaded up/down switch for safety

  • 2-piece motor/drive cover

  • Aluminum bunks

• Double side mounted drive

• Lift range 10' - lift speed approximately 3.5 ft/min

• The 4 post piling boat lifts are available with 10', 11', or 12' cradles. Cradles are the bottom beam

• Enclosed gear available for upgrade