Pontoon/Tritoon Lifts and Accessories

Any of our Boat Lifts can be used as a pontoon boat lift with the addition of our Pontoon Adapter Kits.

We offer two different styles of Pontoon Adapters - a Floor Adapter and a Tube Adapter.

 
 

DOOZIE DELUXE PONTOON 9’ OR 10’

This lift have floor adapters

This lift have floor adapters

This lift can be used in most boat house designs with properly placed pilings. It is one of our best sellers due to the price point, while it is still strong enough to pick up a very wide variety of pontoons and tritoons.

  • Capacities

    • 3,000lb

    • 4,000lb

  • Hot Dip Galvanized

  • Designed to lift boat from from above, under roof

  • Lifts come complete (except wood)

    • Pipe, steel, parts, cable, and hardware

    • Spring loaded up/down switch for safety

    • 2-piece motor/drive cover

  • Side mounted drive for easy maintenance

  • Lift range 10' - lift speed approximately 3.5 ft/min

  • Single Side Mounted Motor

  • Lifts available with:

    • 9' or 10' cradles. Cradles are the bottom beam

    • Floor Adapter (Standard) OR

    • 2 or 3 tube adapter

DOOZIE CENTER MOUNT PONTOON 9’ OR 10’

This lift has tritoon tube adapters

This lift has tritoon tube adapters

Our Overhead Center Mount Boat Lifts are ideal for any tight situation in your boat slip.

By adding upper beams to your boat house, you create flexibility in where the lifting points are located.

  • Capacities

    • 4,000lb

    • 6,000lb

  • Hot Dip Galvanized

  • Designed to lift boat from from above, under roof

  • Lifts come complete (except wood)

    • Pipe, steel, parts, cable, and hardware

    • Spring loaded up/down switch for safety

    • 2-piece motor/drive cover

  • Center mounted drive

  • Lift range 10' - lift speed approximately 3.5 ft/min

  • The Boat House Overhead Center Mount Boat Lifts are available with:

    • 9' or 10' cradles. Cradles are the bottom beam.

    • Floor Adapter (Standard) OR

    • 2 or 3 tube adapter

4000BH DOOZIE SIDE MOUNT PONTOON 9’ OR 10’

This lift has floor adapters

This lift has floor adapters

By adding upper beams to your boat house, you are allowing installation flexibility providing leeway in where the lifting points are located.

The Overhead Side Mount Boat Lift differs from the Overhead Center Mount because it has the Motor, Gear Plate, and Pipe mounted on one of the sides of your lift, instead of the center. Having it mounted on the side allows for much more room above your boat, making this lift ideal for a wakeboard boat or a boat with a t-top.

  • Capacities

    • 4,000lb

    • 6,000lb

  • Hot Dip Galvanized

  • Designed to lift boat from from above, under roof

  • Lifts come complete (except wood)

    • Pipe, steel, parts, cable, and hardware

    • Spring loaded up/down switch for safety

    • 2-piece motor/drive cover

  • Side mounted drive

  • Lift range 10' - lift speed approximately 3.5 ft/min

  • The Boat House Overhead Side Mount Boat Lifts are available with:

    • 9' or 10' cradles. Cradles are the bottom beam.

    • Floor Adapter (Standard) OR

    • 2 or 3 tube adapter

Floor Adapter

The Floor Adapter is an extension that clamps directly to the cradle and allows you to lift your boat up from the under floor of your Pontoon boat or Tritoon Boat. They do NOT come with wood. Wood needed includes two 2x10x16’s and two 2x4x16’s. Click here to watch installation video.

Tube Adapter

The Tube Adapter is an extension that clamps directly to your cradle that allows you to pick your boat up directly from the tubes themselves. Our tube adapter is designed to hug your pontoons allowing for a safe and gentle lift. We also have these available for tritoons. They do NOT come with wood. Wood needed includes four 2x4x16. **Note that some tritoons have a larger middle tube than the outside tubes. Tritoon boats design like this will need to get the floor adapter. Click here for installation instructions.

CONTACT US

For more information contact us at: 252-586-5437 or email us at: boatlifts@doozieboatlifts.com