Doozie Accessories


 

Cable Weights

10 pound lead ball that sits on your cables to prevent them from unwinding when the lift is in the water. It also help prevents bunks from floating. Each weight is sold separately. Most customers buy four. Weights used to keep your cables from unwinding should be mounted high on the cables. Weights used to keep your bunks from floating should be mounted low on your cables. Nuts and bolts are included.


Doozie Cable Covers

Doozie cable covers are high quality canvas that zip to allow easy access over the cables. The insides are high quality foam that doesn't disintegrate overtime and allows for a cushion between boat and cables. These cables look nice on any dock and prevent steel splinters when accidentally grabbing cables to get on and off your boat. Covers coming in 5 or 6 feet tall and are sold in a set of 4 or individually.


IMG_2457.JPG

Carpet Strip

Black carpet for the bunks (wood) of your lifts. Come in 12 foot rolls and is 5 1/2 inches wide. Use roofing nails or large staple to mount to wood (not included).


C-Shape 10’ or 12’ Bumpers

The c-shape bumper comes in 10 or 12 foot strips. This bumper provides protection for the boat and dock. The bumper sits flat against the dock. Uses 14 screws that are sold separately to mounts to the dock. Screws come in packages of 14, 50, and 100.


Edge Guard bumper 10”

The edge guard bumper comes in 10 foot strips. It covers the lip of the dock and provides protection for the boat and dock. Uses 14 screws that are sold separately to mounts to the dock. Screws come in packages of 14, 50, and 100.


doozie Dock Bumper

3 feet tall and 4 inches wide, this doozie dock bumper saves both your dock and boat from damage. It easily mounds on the dock with four included bolts.


Corner bumpers


Corner fenders


Doozie Handrail

The Doozie handrail is a dock must have! Mounts onto a piling and allows for easy access in and out of your boat. Great for all ages. Comes in large (32” as shown in picture) or small (16”). Hardware included


Doozie Ladder

After seeing and hearing about cheap ladders, we custom designed this ladder to fix all common problems. This ladder is made from aluminum and can withstand both lake and salt water conditions. It Easley swings up out of the water to keep it clean when not in use. This ladder’s handrail makes it easy for people of all ages to get out of the water. Convenient 20° angle to make entering and exiting the water easier, providing a more stair-like feel as opposed to normal vertical ladders. We have three different sizes. *Measurements do not include the handles.

  • 6 - step (59 inches)

  • 7 - step (70 inches)

  • 8 - step (81 inches)

We recommend getting the longest ladder your water depth allows for. To measure water depth, measure from the bottom of the lake/river/etc to the top of the dock. If you live in tidal areas, it would also be helpful to the measure low tide and high tide to the top of your dock. This will better help you pick out the best ladder. **Note: wipe off tape measure with towel before rolling it up to prevent water from rusting the metal.

The handles are 23 inches tall and 25 inches wide

The steps are 4 inches wide and 18 long

Hardware included


Drive Back pulley Cover 10” or 12”

Cover for belt pulley. Drive back pulley covers come in 10 inch or 12 inch sizes. If you have a 10” belt pulley, you will need a 10” pulley cover. 12” belt pulley needs a 12” pulley cover. Nuts and bolts not included but can be added on request. These covers prevent nature/weather from impacting your pulley.


Drive Cover, pulley cover w/hardware

Drive cover goes over the gear plate. Pulley cover is 10” on 3000lb and 4000lb lifts. Pulley cover is 12” on 6000lb+ lifts. This kit comes with all needed hardware and instructions. The drive cover prevent nature/weather from impacting your pulley and gear plate.


DRIVE Front COVER

Drive cover goes over the gear plate. The drive cover prevent nature/weather from impacting your pulley and gear plate. Nuts and bolts not included but can be added on request.


Grease Gutters

Protect your boat and boat lift with Grease Gutters, and eliminate grease damage caused by boat lifts. 

  • Keeps grease out of your boat

  • Continually lubricates, reducing wear on your boat lift’s bearings and motor

  • Practically eliminates the need for re-lubrication

  • Protects the environment by keeping grease out of the water

  • Easy to install - they just snap on over the boat lift’s pipe hanger

Here are instruction on how to install Grease Gutters


loading post

Metal brackets that help you park your boat in the middle of your lift. 1 1/4” x 5’ PVC pipes slide over the bracket. PVC pipes not included. Comes in set of 4 with hardware. We also have large loading post for cradles that are 6”.


Kids Onesie/ Shirt

Sizes

  • 18 Months

  • 2T

  • 3T

  • 4T

  • Youth Small


T-Shirts


Wireless Remotes

Wireless remotes are a must have! They make life easier and your time on the water better. We have remotes for:

  • Jet Ski lifts

  • Single motor lifts

  • Single motor lifts w/ limit switch

  • Double motor lifts

  • Double motor lifts w/ limit switches

Limit switches will automatically stop your lift when they get to the designated up or down position. This is really the most dummy proof solution to working your lift.

The remote takes (2) 3V batteries

Here are the install instructions for the wireless remotes. The instructions might look daunting but it's actually very simple.


Folding Dock Cleats


bungee dock lines